"नये भारत का नया Tender Portal"
Supply Of High Performance Anticorrosion Epoxy Coating (two Pack) Finishing Paint Colour:green To Specn.rdso/m&c/pcn/123-2018.
2.8.1:earth Work In Excavation By Mechanical Means (hydraulic Excavator) /manual Means In Foundation Trenches Or Drains (not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.all Kinds Of Soil 4.1.3:providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:2:4 (cement : 2 Coarse Sand (zone-iii)derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) "10.25.2:item Shifted To Sub Head 14 As Item 14.73 Item Shifted To Head 14 As Item 14.74 Steel Work Welded In Built Up Sections/framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.in Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works" 13.52.1:finishing With Epoxy Paint (two Or More Coats) At All Locations Prepared And Applied As Per Manufacturer's Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete.on Steel Work Od79561/2025-2026:roofing With Gi Trafford Sheets .35 Mm Thick Or Nearest Available Thickness Powder Coated With Over Lap Of 150 Mm At Ends And Gi Hook Or Crank Ci Bolts And Nuts Including Plain Washers And Bitumen Washers Etc. Complete. 13.71:lettering With Black Japan Pint Of Approved Brand And Manufacture "od79682/2025-2026:provision Of Head Load To Cement Steel To Edamalakudy Graramapanchayath As Per Go No.188/2014 Dated On 20-01-2015 Rs 20/kg In This Work Total Waight Of Steel Gi Sheet.cement,tiles"
Supply Of High Performance Anti Corrosive Epoxy Coatingtwo Pack Finishing Paint, Colour: Green To Specn.rdso/m&c/pcn/123-2018 Or Latest. Specn: Rdso Specification No. Rdso/m&c/pcn/123-2018 Or Latest..
Construction Of Service Supporting Structure Between Swb And Wmp, Epoxy Painting And Associated Finishing Works In Wmp At Frfcf Project Site At Kalpakkam
Construction Of Service Supporting Structure Between Swb And Wmp, Epoxy Painting And Associated Finishing Works In Wmp At Frfcf Project Site At Kalpakkam
Repair To Plaster In Patches, Providing And Applying White Cement Based Putty And Finishing With Epoxy Paint Etc C/o New Block And Over Hauling Of Existing Block Of Civil Hospital At Theog Distt. Shimla, Hp
Construction Of New Block And Over Hauling Of Existing Block Of Civil Hospital At Theog Distt. Shimla, H.p. (sh: -repair To Plaster In Patches, Providing And Applying White Cement Based Putty And Finishing With Epoxy Paint Etc.)
Gem Bids For Chemical Resistant Epoxide Finishing Paint , Epoxy Based Zinc Rich Primer Paint , Micaceous Iron Oxide Paint
This Include Supply And Fixing Rolling Shutters Of Approved Make, Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters, Providing And Fixing Ball Bearing For Rolling Shutters, Finishing With Epoxy Paint. Supply And Installation Of Rolling Shutters At Soubhagya Complex, Chalai, Thiruvananthapuram
Supply And Installing Of Work Surface - Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Flap Provided On Work Surface For Wire Management. Wire Management - Power Box Made With 0.8 Mm Thick Crca Is: 513, With Switch Plate 8+3 Module Cut Out Provision For Anchor Roma. This Is Fixed With Worktop Along The Width At Access Flap Position. Modesty Panel & Side Skirting - Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Understructure - Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Top Shelf - Made Of 18Mm Thick Pre-Laminated Twin Board Of E1- P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Hinge Door + Drawer Unit - Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. **Drawer Bottom Is Made Of 5.5Thk Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Is Provided With Cam Lock For Security. Essential Accessories - Wire Riser Made Of 0.8Mm Crca Is-513 Is Provided For Proper Wire Management. Organizer Plate Made Of 1.2Mm Crca Is-513 Is Provided For Magnetic Sticky Notes. Bag Hanger Hook Made Of 1.2Mm Crca Is513 Is Provided For Bag Hanging. Length - 1500Mm Depth - 725Mm Height - 740Mm. It Should Be Is Awarded With Greenguard As Well As Indoor Advantage Gold Product Sustainability Certifications, Supply And Installation Of Office Table Of Specifications As Enterprise 1200 Table Without Cpu Hanger Size Shall Be 1200 Width Mm X 600 Depth Mm X 728 Height Mm. Top Shall Be 18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca, Finish : Powder Coat Epoxy Polyster . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube, Finish Powder Coat Epoxy Polyster.The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat Epoxy Polyster Plus The Drawer Front Shall Be 0.8 Mm Thick Crca Finish Powder Coat Epoxy Polyster Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat Epoxy Polyster And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat Epoxy Polyster ., Supply And Installation Of Trident Junior 1 Main Desk Size Shall Be 1200 Width X 600 Depth X 743 Height . Top Shall Be Of 18 Mm Thickness Made Of Plt Board With 2 Mm Edge Banding. Wenge And Savannah Maple Plt Board Shall Be Used. The Understructure Shall Be In Pre-Laminated Panels Made With Plt Boards . 2- Drawerand 3 - Drawer Storage Units With Different Combinations To Support Tops Made With 18 Mm Plt Boards Of Different Colours.Modesty And Back Panels Made With 18 Mm Plt Boards. The Pedestals / Storages Shall Be Fitted With Necessary Locks., Tsupply And Installation Of Trident Senior Main Desk Size Shall Be 1804 Width X 450 Depth X 750 Height. Top Shall Be Made Up Of Pvc Membrane Pressed Of 25 Mm Thick Mdf - One Side Laminate Board With 0.4 Mm Pvc Membrane Pressed On To Tops. The Top Shall Be Having Duck Nose And Half Round Profile Edges And Top Is Made In Only One Finish Which Is European Ash., Supply And Installation Of Back Unit 1800X500x750 Top Panel-Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Slide Door Unitmade Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side, Bottom, Back And Shelves. Shutters Are Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening.Storage Is Provided With Lock For Security.The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate, Supply And Installation Of Storwel Plain Shall Have An Overall Size Of 916Mmwx486mmdx1981mmh With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm High Yield Strength And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns +/- 10. Plenty Of Colour Options And Shelving Options Shall Be Available.The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate.
