"नये भारत का नया Tender Portal"
Supply of 1 Circular Magnet Scrap Crane
Supply of Hand Magnet / Scrap Collector To Separate Ferrous Particles.
Supply of Circular Lifting Magnet For Lifting Cold As Well As Hot Material Up To 600Deg C In Foundry Environment . Deep Field Coil Design, Copper Wound For 220V Dc Operation, Must Include 03 Leg Chain And Bail Assembly, Ext Ernal Electrical Connectors And Surge Suppressor, Heavy Duty Cast Magnet Designed For Severe Scrap Handling D Uty Similar To Ohio Make Model 66Dcwx, Confirming To The Following Specification For Single Magnet Characteri Stics- 1. Cold Current - 105 Amps Max. 2. Cold Power- 18.5 Kw 3. Self-Weight Should Not Be More Than 5Ton In Clusive Of Chain, Bail And Other Accessories 4. Duty Cycle: Min. 50%, 24 Hrs./ Day 7 Days/ Week, To Allow Extra Ha Ndling Time Of Hot Materials At 10Minutes Lift Cycle 5. Diameter Of Magnet: 66Inches -1 Inch +3Inch 1650Mm -25. 5Mm/+50Mm 6. Lifting Capacities Shall Not Be Less Than A Pig Iron: H M S - 5200 Lbs. 2359Kgs B Broken/Cu T Scrap: 2700 - 3300 Lbs. 1225-1497Kgs C Steel Turnings: 1700 Lbs. 771Kgs Note: The Tolerance In Lifting C Apacity Must Be +/-25% Of The Above Mentioned Ranges At All Operating Conditions. 7. Magnet Conductor Shall Be Of Premium Electrical Grade Copper With 99.99% Purity With Class H Insulation For Maximum Coil Life Under Severe Operation. 8. Magnet Shall Be Of High Grade Cast Steel Welded Construction For Strength And Waterproof. 9. Heavy Duty, Nonmagnetic Bottom Plate & Sealing Plate, Made Of Wear Resistant & Work Hardened Manganese Steel Shall Be Used To Protect The Coil From Damage Caused By Impact Including Bumping Plate. 10. Additional Protection From Moisture & Impact Is To Be Provided To The Coil With The Use Of Non-Magnetic Manganese Sealing Plate.11. Heavy Duty, Annealed Alloy Steel 3-Legged Chain With A Master Hook Bail Is To Be Provided.12. Suspension Lugs Should Be Heavy-Duty & Pins Shall Be Provided To Connect The Chain To The Magnet. 13. Suitable Rating Surge Suppresser Me Tro Cell Shall Be Introduced In The Magnet. 14. Electrical Connectors: - Plug-In Type Connectors Made From A Size Of 25 Sq. Mm 2 - Conductor Type W Magnet Cable, 2000V Dc Rated For Durability And Ease Of Replacement. 15. E Xternal Connectors To Be Clamped And Protected With A Shield. 16. 08 Hrs. Heat Rise To Be Performed To Verify Mag Net Integrity. Temperature Rise Test, High Voltage Test And Insulation Resistance Test Should Be Performed And Reco Rded For Traceability And Future Reference. Note: 1. Magnet Must Be Same Or Similar In All Respects To The 66 Inch 1676 Mm Dcwx Model, Ohio Make Magnets. 2. All Relevant Tests And Test Certificates Shall Be Submitted Alon G With The Supply. 3. The Manufacturer Shall Carry Out Continuous Load Test. 4. Warranty: 24 Month From The Date Of Commissioning And Proving Out Of M&P. 5. Stage Inspection By Tpi Before Closing The Magnet And Inspection R Eport To Be Submitted By The Firm To Rwp/Bela With The Supply. 6. Tenderer Shall Indicate The Service Support Avail Ability. Stage Inspection By Tpi Before Closing The Magnet As 100% Of Po Qty. Warranty Period: 24 Months After The Date Of Delivery
Auction Sale Of Scrap - Door Gasket With Magnet
Supply of 1 Portable Circular Type Electro Magnet For Lifting Scrap As Per Specification No Ff07020; R01 Q3
Portable Circular Type Electro Magnet For Lifting Scrap As Per Specification No Ff07020; R01
Supply of Circular Lifting Magnet For Lifting Cold As Well As Hot Material Up To 600 Degree C In Foundry Environment. Deep Field Coil Design, Copper Wound For 220V Dc Operation .Heavy Duty Cast Magnet Designed For Severe Scrap Handling Duty Similar To Ohio Make Model 66Dcwx, Confirming To The Following Specification For Single Magnet Characteristics ? 1Cold Current-105 Amps Max. 2Cold Power -18.5Kw. 3Self Weight Should Not Be More Than 5 Ton Inclusive Of Chain, Bail And Other Accessories. 4Duty Cycle : 50% At 10 Minutes Cycle. 5Diameter Of Magnet: 66 Inches- 1 Inch + 3 Inch 1650 Mm -25.5 Mm/ +50 Mm. 6Lifting Capacities Shall Not Be Less Than: Apig Iron: 1 Hm-5200 Lbs 2359 Kgs. B2 Broken: 2700 -3300 Lbs 1225-1497 Kgs. Csteel Turnings: 1700 Lbs 771 Kgs. Note: The Tolerance In Lifting Capacity Is +/- 25% Of The Above Mentioned Ranges Under Sl No.2 At All Operating Conditions. 7Magnet Conductor Shall Be Of Premium Electrical Grade Copper With 99.99% Purity With Class H Insulation For Maximum Coil Life Under Severe Operation. 8Magnet Shall Be Of High Grade Cast Steel Welded Construction Waterproof Strength. 9Heavy Duty, Non Magnetic Bottom Plate & Sealing Plate Made Of Wear Resistant & Work Hardened Manganese Steel Shall Be Used To Protect The Coil From Damage Caused By Impact Including Bumping Plate. 10Additional Protection From Moisture & Impact Is To Be Provided To The Coil With The Use Of Non- Magnetic Manganese Sealing Plate. 11Heavy Duty Annealed Alloy Steel 3-Legged Chain With A Master Bail Is To Be Provided. 12Heavy-Duty Lugs & Pins Shall Be Provided To Connect The Chain To The Magnet. 13Suitable Rating Surge Suppresser Metro Cell Shall Be Introduced In The Magnet. 14All Relevant Tests And Test Certificates Shall Be Submitted Along With Supply. For Doing Continuous Load Test, If There Is No Facility At Firms Premises, The Manufacturer Shall Carry Out These Tests At Rwf On Sundays/ Non Working Days. 15Warranty:12 Months From The Date Of Installation Or 18 Months From The Date Of Supply Whichever Is Earlier. Note: 1.Test Certificates Shall Be Enclosed 2. Stage Inspection Before Closing The Magnet. 3. Tender Shall Indicate The Service Support Available. Warranty Period: 12 Months After The Date Of Delivery
