"नये भारत का नया Tender Portal"
Exhaust Emission Analyzer With Sensors For The Determination Of Oxygen, Carbon Monoxide, Nitric Oxide, Nitrogen Dioxide, Sulfur Dioxide, Hydrocarbon, Temperature, Hydrogen Sulfide, Combustion Efficiency
Periodical Examination, Testing And Painting Of Hydrogen, Nitrogen And Carbon Dioxide Gas Cylinders And Repairing Of Defective Gas Cylinders, If Any Of Stpp, Jaipur, Mancherial, Telanagana Under Rule 35 Of Gas Cylinder Rules On Value Rate Contract Basis For A Period Of Two Years.
Annual Calibration And Certification Of Chlorine, Ammonia And Nitrogen Dioxide Gas Detectors.
Supply of Set Of Three Numbers Of Standard Calibration Gas Mixture For Dissolved Gas Analyzer Of 0.5 Li Tres Canister With Fine Control Needle Valve And Septum As Spares To Draw Sample Directly From Canister Usi Ng Gc Syringe. Preparation Tolerance Plus Or Minus 20 % And Shelf Life 12 Months. Filling Pressure 20 Kg/ Sq.Cm. Gas Composition Is As Follows: Item 1: Hydrogen 5 Ppm,, Methane 5 Ppm,, Ethylene 5 Ppm,, Ethane 5 Ppm, Acetylene 5 Ppm, Carbon Monoxide 25 Ppm, Carbon Dioxide 25 Ppm, Propane 500 Ppm & Propylene 500 Ppm, Nitrogen As Balance; Item 2: Hydrogen 750 Ppm, Methane 750 Ppm, Ethylene 750 Ppm, Ethane 7 50 Ppm, Acetylene 750 Ppm, Carbon Monoxide 7500 Ppm & Carbon Dioxide 7500 Ppm, Nitrogen As Balance ; Item 3: Hydrogen 1000 Ppm, Methane 1000 Ppm, . Ethylene 1000 Ppm, Ethane 1000 Ppm, Acetylene 1000 Ppm, Carbon Monoxide 12000 Ppm & Carbon Dioxide 12000 Ppm, Nitrogen As Balance. The Calibration Gas Standards Must Be Supplied With A Certificate Of Analysis Or Calibration Certificate Having Traceability To Na Bl/Nist Standards Warranty Period: 12 Months After The Date Of Delivery
Supply of Calibration Gas Mixture In 0.5 Litre W/C Aluminum Canister Alongwith Fine Control Needle Valv E And Pressure Gauge: Methane - 1000 Ppm, Ethane - 1000 Ppm, Ethylene - 1000 Ppm, Acetylene - 1000 Pp M, Hydrogen - 1000 Ppm, Carbon Monoxide - 1000 Ppm, Carbon Dioxide - 5000 Ppm And Nitrogen Balance. Filling Pressure : 20 Kg/Cm2. P.T- +10%, C.A- +1%, Stability- 24 Months. Make:- Spancan Or Similar Warra Nty Period: 30 Months After The Date Of Delivery
Custom Bid For Services - Proposal For Hydro Testing Painting Marking Of Carbon Dioxide Nitrogen Gas Cylinders For Ktps Dvc Koderma
Supply of Welding Hose Pipe, High Strength Synthetic Yarn Braiding, Smooth, Synthetic Rubber, Designe D For Welding, Cutting And Specific Welding Hose Cartering For Oxygen, Carbon Dioxide, Nitrogen, Argon And Fuel Gases Including Acetylene, Natural Gas, Temperature 32 Degree Cantigrade To 80 Degree Cantigrade, Nb 8.0 Mm, Working Pressure 20-25 Kg/Cm. Sq. At 30 Degree Cantigrade. Total Requirement 400 Mtrs Red Welding Hose Pipe 200 Mtrs & Blue Welding Hose Pipe 200 Mtrs Warranty Period: 30 Months After The Date Of Delivery
Supply of 25367 Nitrogen Gas Carbon Dioxide Gas Replacement Of N2 Or Co2 Gas Cylinder Valve Replacement Of N2 Or Co2 Gas Cylinder Cap Replacement Of N2 Or Co2gas Cylinder Gland Nut Replacement Of N2 Or Co2 Cylinder Spindles Replacement Of N2 Or Co2 Cylinder Cylinder Teflon Washer Painting Of N2 Or Co2 Gas Cylinder Hydrotest Of N2or Co2 Gas Cylinder
Supply Of Medical Gases Compressed Medical Oxygen, Nitrous Oxide, Nitrogen & Carbon Dioxide
Supply of Refilling Of Nitrogen And Co2 Gas In Cylinder Along With Associated Optional Works, 25367 Nitrogen Gas Carbon Dioxide Gas Replacement Of N2 Or Co2 Gas Cylinder Valve Replacement Of N2 Or Co2 Gas Cylinder Cap Replacement Of N2 Or Co2gas Cylinder Gland Nut Replacement Of N2 Or Co2 Cylinder Spindles Replacement Of N2 Or Co2 Cylinder Cylinder Teflon Washer Painting Of N2 Or Co2 Gas Cylinder Hydrotest Of N2or Co2 Gas Cylinder
