"नये भारत का नया Tender Portal"
Gem bids for A/Bar Round 20Mm D-16-20Abr, Aluminium Barround 30Mm D1930abr, Aluminium Bar Round 16Mmd16-16-Abr, Aluminium Bar Round 18Mm Diaamg2m18abr
Single Core 150 Sq Mm 33 Kv Ue Xlpe Cable With Extruded Innersheath Of Pvc Single Layer Of Hard Drawn Aluminium Round Wire And Overall Pvc Sheathed Cable
Gem Bids For Aluminium Round Bar 29.20mm Diameter
Gem bids for Lead Sheet 1.5Mm, Steel Bar Round 50Mm, Aluminium Bar Round 30Mmd16-30-Abr
Gem bids for Partition, Glass Partition Work, Supplying, Transporting, Storing, Fabricating And Erecting -Structural Steel And Painting, Chemical Anchor Fasteners, Aluminium Work For Doors-Fixed, Aluminium Work For Doors-Shutters, 100Mm Brasslocks, Aluminium Round Shape Handle, Aluminium Towerbolts, Toughened Glass Panes Of 6.0 Mm Thick
Gem Bids For Aluminium Alloy 45 Mm Dia To Drg. No.mpf/lf/0600502045., Aluminum Bronze Round 40mmdia To Matl. Specn. Gost1628-78 Or Ca 104m To Bs:2874-1986., Aluminium Bronze Rd 28 Mm Dia Drg. No.mpf/lf/0731403028 Matl. Specn. Ca-104 M Bs 2874:1986., Aluminium Bronze 30 Mm Dia To Specn. Gost-493-79/or Grade Ab1 Is: 305-1981 To Drg. No. Mpf/lf/073140303, Aluminium Bronze Round 45 Mm Dia. Tospecn. Brazh Mts 10-3- 1.5 Gost-1628-78/or Ca 104mbs: 2874-1986.
Gem Bids For Procurement, Bar Round,stainless Steel,p/n D17-4ph Ann 5/16in (8.0mm),solution Heattreated, Central Ground, Ams 5643r, Austenetic Type-non Magnetic Bright Stainless Steel Plate In Cold Rolled,annealed,pickled Condition Con.to Us Federal Spec.qq-s-766c, Aisi 304-chromium-18 Percentage , Nickle-8 Percentage , Halstd 1210,size Thickness6mm X 1000 X 1000mm. Plate, Stainless Steel,aisi Type 304l,annealed, No.2d Finish, Astm A-666, Size - Thickness6.35 X 1000 X1000mm Bar Round,low Alloy Steel, Condition Annealed, Hot Rolled,specification Dsae 4340 /en24, Bs 817m40, Ams-s-5000a Cond.c(canc), Size - Dia 15.9mm, 1 To 2m Length Bar Round,stainless Steel,17-4ph,solution Heat Treated, Central Ground Ams 5643r, Size - Dia 15.9 X 500mm, Bar Round,stainless Steel,d17-4ph,solution Heattreated, Central Ground, Ams 5643r, Size - Dia 6.35 X 500 To 1000mm. Austenitic Type Free Machining Non-magnetic Bright Quality Stainless Steel Round Conf.to Hal Std 1206,aisi-303-gr18/10,dia 65mmx2 To 3 Mtrs Length Austenitic Type Free Machining Non-magnetic Bright Quality Stainless Steel Hexagonal Conf.to Hal Std 1206,aisi-303-gr18/10,a/f 19mmx2 To 3 Mtrs Length Medium Carbon Steel Cold Drawn Round Conforming To Hal Std 1051, Is 1570 Part Ii, Grade (c-40 / 40 C 8) / En 8 , En 10083-3 / Bs 080 M40 , Bs 970 Size Dia 25 Mm X 1 To 2 Meters In Length. Ss 304 Round, Condition Annealed, Specification Annealed, Specification 304, Qq-s-763 / 304, Astm A276 / Aisi 304 / 1.4301 Grade X5 Crni189, Din 17440 / 1.4301 Grade X5 Crni1810, En 10088-3 / Bs 304 S31, Bs970 / Uni X5crni1810, Uni 6900 / 4 /gost 08kh 18n10 Or O6kh 18n11 / Is 1570-5 Grade X04cr19ni9 / Is 6603, Grade X04 Cr19ni9 / En 58e Size Dia 16 Mm X 1 To 2 Meters In Length. Ss 304 Round, Condition Annealed, Specification Annealed, Specification 304, Qq-s-763 / 304, Astm A276 / Aisi 304 / 1.4301 Grade X5 Crni189, Din 17440 / 1.4301 Grade X5 Crni1810, En 10088-3 / Bs 304 S31, Bs970 / Uni X5crni1810, Uni 6900 / 4 /gost 08kh 18n10 Or O6kh 18n11 / Is 1570-5 Grade X04cr19ni9 / Is 6603, Grade X04 Cr19ni9 / En 58e Size Dia 30 Mm X 1 To 2 Meters In Length. Hot Rolled Structural Steel Sheet, Condition Normalised, Specification 1.0037 S 235jr, En 10025 / Rst 37.2, Din 17100 / Fe 360 B, Uni 7070 / Bs 40b, Bs 4360 Size Thickness 3 Mm X 1000 X 1000 Mm With Pvc Coating On Both Sides. Stainless Steel Plate, Specification Ss 304 Per Qq-s-766 Size Thickness12 Mm X 1000 X 1000 Mm. Bar Round,stainless Steel,aisi Type 303, Annealed,0.5in,cold Finish, Ams 5640u Type 2, Dia 12.7 (0.5in) X 500mm, Austenitic Type (303 Se) Free Machining Non-magnetic Bright Quality Stainless Steel Hexagonal Bar Conforming To Hal Std 1206 / 303 Se, Astm A 582 / Ams 5641 / Ams 5640 Type 2 / Mil-s-7720, 303 Se / Bs 303 S 41, Bs 970 / Aisi 303 Se Size A/f 4.8 Mm X 2 To 3 Meters In Length Bar Hexagonal,stainless Steel,aisi Type 303, Sollution Heat Treated, Ams 5640u, Size -a/f 4.7625 X 500 To 1000 Mm Hexagonal,stainless Steel,(5/8 In) ,aisi Type 303 Annealed, Cold Finish,ams5640u, Type2, Size -a/f15.875 (5/8in) X 500 To 1000mm Ni-cr-mo Alloy Steel Round, Conforming To Hal Std 1032, Condition Ht (hrc 32- 38), Specification 1.6562 40nicrmo8, Din 17200 / En24,bs 970/bs 817 M40, Bs 970 /is 5517 / 4367 / 3930 Gr 40ni6cr4mo3 / Gr 30chnml , Gost 4543, Size Dia 20 Mm X 1 To 2 Meters In Length. Ni-cr-mo Alloy Steel Round, Conforming To Hal Std 1032, Condition Ht (hrc 32- 38) 1.6562 40nicrmo8, Din 17200 / En24,bs 970/bs 817 M40, Bs 970 / Is 5517 / 4367 / 3930 Grade 40ni6cr4mo3 / Gr 30chnml , Gost 4543 Size Dia 25 Mm X 1 To 2 Meters In Length. Hot Rolled Ni-cr-mo Alloy Steel Round Condition Annealed, Conforming To Hal Std 1032, As Per En 24, Bs 970 / Bs 817 M40, Bs 970 / Gr 40, Ni6 Cr 4 Mo 3, Is 5517 Or Is 3930, Size Dia 25 Mm X 1 To 2 Meters In Length. Austenitic Stainless Steel Rod, Condition Plusat (solution Annealed), Specification Z10cnf18-09 (or) X8crnis18-09 As Per En 10088-3, , Tensile Strength 500-750 Mpa, Size Dia 6 Mm X 1 To 2 Meters In Length. Austenitic Stainless Steel Rod, Condition Plusat (solution Annealed), Specification Z2cn18-10 (or) X2crni18-10 As Per En 10088-3,tensile Strength 500-750 Mpa Size Dia 7 Mm X 1 To 2 Meters In Length. Austenitic Stainless Steel Rod, Condition Plusat (solution Annealed) Specification Z10cnf18-09 (or) X8crnis18-09 As Per En 10088-3, Tensile Strength 500-750 Mpa ,size Dia 14 Mm X 1 To 2 Meters In Length.. Austenitic Stainless Steel Hexagonal Rod, Condition Plusat (solution Annealed), Specification Z10cnf18-09 (or) X8crnis18-09 As Per En 10088-3, Tensile Strength 500-750 Mpa ,size A/f 5 Mm X 1to 2 Meters In Length. Austenitic Stainless Steel Hexagonal Rod, Condition Plus C700, Specification X8crnis18-09 As Per En 10088-3, Tensile Strength Rm Equal To 700-850n/mm2, Size A/f 5 Mm X 1to 2 Meters In Length. Aluminium Bronze Rod Condition Annealed, Conforming To Hal Std 1313, Ams 4640 / Astm B150, C63200 Size Dia 35 Mm X 1 To 2 Meters In Length Aluminium Bronze Rod Condition Annealed, Conforming To Hal Std 1313, Ams 4640 / Astm B150, C63200 Size Dia 40mm X 1 To 2 Meters In Length. Aluminium Bronze Rod, Condition Hard (150 To 170 Hb), Specification (bs 1400 Ab2) / (as 1565-c95810) / (astm B505 And B271-958) / (sae-ca958) / (uns-c95800), Size Dia 55 Mm X 2 To 3 Meters In Length. Aluminium Bronze Rod Condition Annealed, Conforming To Hal Std 1313, Ams 4640 / Astm B150, C63200 / Bs 1400 - Ab2 Size Dia 65 Mm X 1000 Mm In Length. Brass Sheet Hal Std 1300-1/4h, Is 410-cuzn-37-1/4, Size Thickness 0.4mm X 350 X 1200mm With Pvc Coating On Both Sides. Free Machining Brass Rod, Specification Cuzn39pb3 R-430 As Per En 12164 / Hal Std1301-1/2 Hard, Size Dia 6 Mm X 1 To2 Mtrs In Length. Electrolytic Copper Sheet,strip Andfoil, Condition Annealed (o) As Per Gr Cu-etp, Is 191 Part V/ Is 14811,gr Etp/ Cu-etp(mechanical Properties),is1897/hal Std 1310-o, Size 0.8 Mm X 350 Mm X 1200 Mm. Copper Tube Conforming To Hal Std 1311, Condition Drawn, As Per Bs 2871 Part 2, C101 / Is 2501, Etp Tube Size Od 6 Mm X 0.5 Mm (id 5.0 Mm) X 2 To 3 Meters In Length And Ends Should Be Covered With End Caps. Al. Alloy Sheet Hal Std 1252-1/2h,is-737-74 Gr.31000 (ns-3)1/2h, Bs 1470 Gr.ns3 Or L61, 59 Or Qqa-359 Gr.3003 Or Enaw 573-3-3103 Thickness1mmx1000x1000mm Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness10 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness10 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250 Th. Thickness12 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness14 Mm, Min. Size 1000x2000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness20 Mm, Min. Size 1000x1500mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250 Th. Thickness22.5 Mm, Min. Size 3 Feet X 6 Feet .,tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness28.5 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness30 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness19.05 Mm, Min. Size 1250 X 2500 Mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness32.25 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness25.4 Mm, Min. Size 1000x2000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness16 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std. 1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness40 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness57.2 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness50 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness60 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness35 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness69.85 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. (approx. Wt Per Sheet Is 196 Kgs) Alclad Al.alloy Sheets, Spec. 2014/2014 A-t6 /wp, Cladding 1050 A /1070/19500/19700/6003 On Both Sides As Per Bs L165/bs L167 / En 4400-2/en 2087/gr 24345-wp Al.clad, Is 3436/al.clad 2014,astm B209/ams 4029 Clad/hal Std 1250, Th. Thickness5.0 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. It Should Be Protected With Transparent Pvc Coating Morethan 50micro On Both Sides. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness6.0 Mm, Min. Size 1000x2000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness8.0 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness32.0 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Alclad Al.alloy Plates, Spec. 2014/2014 A-t6 /wp/t651, Cladding 1050 A /1070 /19500/19700/6003 On Both Sides As Per Gr 24345-wp Al.clad, Is 736/al.clad 2014 ,astm B209/ D.t.d 5040 A/hal Std 1250, Th. Thickness18.0 Mm, Min. Size 1000x1000mm, Tolerances As Per Ansi H35.2/ Hal Std.1250. Al. Alloy Plate Thickness12.7mm, Temper T651, Specification (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/(is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2)/(enaw6061, En573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) / (din Almg1sicu 3, 3211, En573-3 / En 485-2) Size Thickness 12.7 X 1200 X 1800 Mm Al. Alloy Plate Thickness15.87mm, Temper T651 Specification (6061,qq-a-250/11) / (6061,astmb209) /(ams4027) / ( Is 65032(hp20),is736)/(6061-bsh20,en 485-2/en 573-3)/(enaw6061, En573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din Almg1sicu 3,3211,en573-3/en 485-2) Size Thickness 5/8 Inch (15.875mm) X 4 Feet X 6 Feet Al.alloy Plate, Temper T651 Specification (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/ (is 65032(hp20),is736)/(6061-bsh20,en 485-2/en 573-3)/(enaw6061, En573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din Almg1sicu 3,3211,en573-3/en 485-2/) Size Thickness 3/4 Inch (19.05) Mm X4 Feet (1200 Mm) X 6 Feet (1800 Mm) Aluminium Alloy Plate, Specification En 485-2, Grade Enaw6061, Condition T6/t651 (or) Specification Is 736, Grade 65032, Condition Wp (or) Ams 4027 Size Thickness1 Inch (25.4mm)x1250 X 2500 Mm. Aluminium Alloy Sheet, Condition T6, Specification Enaw 6061, En 485-2, Size Thickness 2.5 Mm X 1000 X 1000 Mm. Packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Material Aluminium Alloy Plate, Condition T6/t651, Specification Enaw 6061, En 485-2, Size Thickness 6 Mm X 1000 X 1000 Mm. Al Alloy Plate Thickness 31.75 Mm,temper T651, Spec (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/(is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2)/(enaw6061, En573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din Almg1sicu 3,3211,en573-3/en 485-2), Size 31.75 X 1000 X 1000 Mm Material Aluminium Alloy Plate, Specification En 485-2, Grade Enaw6061, Condition T6/t651 (or) Specification Is 736, Grade 65032, Condition Wp (or) Ams 4027 Size Thickness 35mm X 1250 X2500mm Aluminium Alloy Plate, Specification T6 , En 485-2, Grade Enaw6061,is 736, Grade 65032, Condition Wp (or) Ams 4027 Size Thickness 40mm X 1250 X2500mm Al Alloy Plate Thickness 48 Mm, Temper T651,spec (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/( Is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2) /(enaw6061, En573-3/en 485-2)/(uni9006/2,en573-3,en 485-2) /(din Almg1sicu 3,3211,en573-3/en 485-2), Size 48 X 1000 X 1000 Mm Plate,aluminium Alloy,6061,t651,8mm, Ams 4027n Thickness8x1000x1000mm , Aluminium Alloy Sheet Al-1100-h14 Per Qq-a-250/1, Size - Thickness0.13 X 350 X 350 Mm, Packing Pvc Coating Of 50 Microns Thickness/ Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Plate, Condition T6, Specification 6061-t6 Per Qq-a-250/11, Size Thickness 31.75 Mm(1 1/4in) X,1000x1000 Aluminium Alloy Plate, Condition T651, Specification 6061-t651 Per Qq-a-250/11,ams4027n Size Thickness 76.2 Mm (3in) X1200x1200mm Aluminium Alloy Plate, Condition T7351, Specification 7075-t7351 Per Ams-qq-a-250/12 Plususq, Size Thickness 114.3 Mm (4.5in) X700x650mm Aluminium Alloy Plate, Condition T651, Specification 6061-t651 Per Ams4027n Size Thickness 57.15mm (2.25in) X1000x1000mm Plate,aluminium Alloy,specification 6061,condition T651,,ams-qq-a-250/11a(canc), Thickness38.1 (1.5in)x1000x1000mm. Plate, Aluminium Alloy, 6061, T651,size - Thickness6.35 X 1000 X 1000mm, Ams-qq-a-250/11a (canc.), Aluminium Alloy Sheet 6061,t651/t6, Size - Thickness3x1000x2000mm, Ams-qq-a-250/11a(canc) / Bs En 485 -2 2008, Packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Sheet, Specification 6061, Condition T6 51, Ams 4027n Size Thickness 2mm X 1250 X2500mm With Pvc Coating Of Thickness 50 Microns And Above On Both Sides. Aluminium Alloy Plate, Condition T651, Specification 6061-t651 Per Qq-a-250/11, Size Thickness 16 Mm X1000 X 1000 Mm. Aluminium Alloy Plate Thickness19.05mm, Condition T651, Specification 6061-t651 Per Qq-a-250/11, Size Thickness 19.05 Mm X1000 X 1000 Mm. Aluminium Alloy Plate, Condition T651, Specification 6061-t651 Per Qq-a-250/11, Size Thickness (2.5in) 63.5 Mm X1000 X 1000 Mm. Al Alloy Plate 6061 -t651, Size Thickness 8 X 1000 X 1000mm. Feet Aircraft Quality Feet Aluminium Alloy Bare Sheets Con To Ams-qqa-250/11. Bar Round,aluminium Alloy,specification - 6061, Condition -t6, Extruded, Ams-qq-a-200/8,size - Dia 11.5 (7/16 In) X500mm Bar Round,aluminium Alloy,specification 6061, Condition T651,cold Finish, Ams-qq-a-225/8a(canc), P/n D 6061, T651,1.3/4in,44.5(1.75in) X 500mm Bar Round,aluminium Alloy, Specification - 6061,condition T651, Cold Finish, Ams-qq-a-225/8a (canc) P/n D 6061, T651,2.1/2in,. 63.5 (2.5in) X500mm Bar Round Aluminium Alloy,specification - 6061, Condition -t651,cold Finish, Ams-qq-a-225/8a (canc), Dia 9.6 Mm (3/8 In) X 500mm. Al.alloy Round Dia 16 Mm X 2 To 3 Mtrs In Length, Temper T6511, Spec (6061,qq-a-200/8)/(enaw6061,en573-3/en 755-2)/(is Grade -65032(he20),is733)/(6061-bsh20,en 573-3/en 755-2)/(ams4150)/(6061,astmb221)/(din Almg1sicu 3.3211, En573-3 /en 755-2)/(uni9006/2,en573-3/en 755-2) Aluminium Alloy Round, Spec Aa2014-t652 , Size Dia 25 Mm X 1000 Mm Aluminium Alloy Round, Spec Aa2014-t652 , Size Dia 70 Mm X 1000 Mm Al Alloy Round Cond T4, Spec Astm B316 Grade Aa2117, Dia 5 Mm X 2 To 3 Mtrs In Length Al Alloy Round Cond T4, Spec Astm B316 Grade Aa2117, Dia 6 Mm X 2 To 3 Mtrs In Length Aluminium Alloy Plate, Condition T651, Specification Almgsi1 Or En Aw-6082 As Per Nf En 485-1 And2, Size Thickness 10 X 1000 X 1000 Mm. Aluminium Alloy Plate, Condition T651, Specification Almgsi1 Or En Aw-6082 . Chemical Composition Is As Per Bs En 573-3 And Mechanical Properties Are As Per Bs En 485-2, Size Thickness 3 X 1000 X 1000 Mm. It Should Be Protected With Pvc Coating Morethan 50 Microns On Both Sides. Aluminium Alloy Plate, Condition T651, Specification Almgsi1 Or En Aw-6082 As Per Nf En 485-1 And2, Size Thickness 44 X 1000 X 1000 Mm. Al.alloy Plate 6061-t6, Size - Thickness12.75 (1/2in) X 1000 X 1000mm, Ams-qq-a-250/11a Al.alloy Round 6061-t6, Size - Dia 6.35 ( Dia 1/4 Inch ) X 1000mm.extruded, Ams-qq-a-200/8 Aluminium Wire Conforming To Is 739-1966, Grade 19500, Condition Annealed, Size Dia 1.0mm X 2 To 3kg Spools. One Side/two Sides Polished(ra 0.2micro M) Non-fading Black Electro Coloured Anodized ( As Per Mil-a-8625, Type Ii, Class 2 ) Sheet Aluminium Specification Hal-1255 Condition 3/4 Hard Or Is737-19000-h6 Size Thickness 0.5 Mm X 300mm X 300mm Aluminium Wire Conforming To Is 739-1966, Grade 19500, Condition Annealed, Size Dia 2.0 Mm Or 14 Swg (2.03 Mm Approx.) In 3 To 5 Kg. Spools. Aluminium Alloy Sheet, 5052, H32, Size - Thickness2.0 (0.08in) X1000 X1000mm, Ams-qq-a-250, Packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Sheet 5052,h32, Size - Thickness3.175 X1000 X1000mm ,ams-qq-a-250/8b, Packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Sheet, Condition H111/o,specification En Aw-5083 Or Ag4.5 Or Almg4.5mn As Per Bs En 573-3 And Bs En 485-2, Size Thickness 2.0 Mm X1250 X 2500 Mm With Pvc Coating Of Thickness 50 Microns And Above On Both Sides. Aluminium Alloy Sheet, Specification Enaw 5052,en573-3/en485-2/5052, Qq-a-250/8,5052,astm B209 ,temper H32/h22 Size 0.2 Mm X 1000 Mm X 1000 Mm,packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Sheet, Specification Enaw 5052,en573-3/en485-2/5052, Qq-a-250/8,5052,astm B209 ,temper H32/h22 Size 0.5 Mm X 1000 Mm X 1000 Mm,packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Sheet, Specification Enaw 5052,en573-3/en485-2/5052, Qq-a-250/8,5052,astm B209 ,temper H32/h22 Size 0.6 Mm X 1000 Mm X 1000 Mm,packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Sheet,specification Enaw 5052,en573-3/en485-2/5052, Qq-a-250/8,5052,astm B209 ,temper H32/h22 Size (0.03in) 0.8 Mm X 1000 Mm X 1000 Mm,packing Pvc Coating Of 50 Microns Thickness / Any Equivalent Protective Coating On Both Sides Of Sheet To Prevent Scratches. Aluminium Alloy Plate, Condition H111/o, Specification En Aw-5083 Or Ag4.5 (or) Almg4.5mn As Per Bs En 573-3 And Bs En 485-2, Size Thickness22 X 1000 X 1000 Mm.
Gem Bids For Kitchen Item, 14 Ayka Reversible Comforter Blanket Bed Sheet White Carpet 5 Ft X 2 Ft Carpet 3 Ft X 2 Ft Carpet 5 Ft X 7 Ft Bucket Plastic 18 Ltrs Aluminium Square Cake Mould Round Aluminium Cake Tin Clazkit Oil Brush Cooking Measuring Cup And Spoon Set
Supply Of Round Head Multigrip Aluminium Blind Rivet.
Gem Bids For 112 Fevicol Sr 998 Leather Cloth Black Sheet Cellular 6mm Thick 2mx1m Sheet Cellular 37mm Thick 2mx1m Aluminium Sheet Half Round 1.22m
